ติดต่อลงโฆษณา [email protected]

ผู้เขียน หัวข้อ: สอนผมแก้ Config ทีคับ  (อ่าน 8764 ครั้ง)

0 สมาชิก และ 1 บุคคลทั่วไป กำลังดูหัวข้อนี้

help piz

  • บุคคลทั่วไป
สอนผมแก้ Config ทีคับ
« เมื่อ: 10/02/06, 08:21:30 »
โค้ด: [เลือก]
// ****** DATABASE TYPE ******
// This is the type of the database server on which your vBulletin database will be located.
// Valid options are mysql and mysqli.  Try to use mysqli if you are using PHP 5 and MySQL 4.1+
$config['Database']['dbtype'] = 'mysql';

// ****** DATABASE NAME ******
// This is the name of the database where your vBulletin will be located.
// This must be created by your webhost.
$config['Database']['dbname'] = 'thaideep_board';

// ****** TABLE PREFIX ******
// Prefix that your vBulletin tables have in the database.
$config['Database']['tableprefix'] = '';

// ****** TECHNICAL EMAIL ADDRESS ******
// If any database errors occur, they will be emailed to the address specified here.
// Leave this blank to not send any emails when there is a database error.
$config['Database']['technicalemail'] = '[email protected]';

// ****** FORCE EMPTY SQL MODE ******
// New versions of MySQL (4.1+) have introduced some behaviors that are
// incompatible with vBulletin. Setting this value to "true" disables those
// behaviors. You only need to modify this value if vBulletin recommends it.
$config['Database']['force_sql_mode'] = false;



// ****** MASTER DATABASE SERVER NAME AND PORT ******
// This is the hostname or IP address and port of the database server.
// If you are unsure of what to put here, leave the default values.
$config['MasterServer']['servername'] = 'localhost';
$config['MasterServer']['port'] = 3306;

// ****** MASTER DATABASE USERNAME & PASSWORD ******
// This is the username and password you use to access MySQL.
// These must be obtained through your webhost.
$config['MasterServer']['username'] = 'thaideep';
$config['MasterServer']['password'] = '**********';

// ****** MASTER DATABASE PERSISTENT CONNECTIONS ******
// This option allows you to turn persistent connections to MySQL on or off.
// The difference in performance is negligible for all but the largest boards.
// If you are unsure what this should be, leave it off. (0 = off; 1 = on)
$config['MasterServer']['usepconnect'] = 0;



// ****** SLAVE DATABASE CONFIGURATION ******
// If you have multiple database backends, this is the information for your slave
// server. If you are not 100% sure you need to fill in this information,
// do not change any of the values here.
$config['SlaveServer']['servername'] = 'http://community.thaideep.com';
$config['SlaveServer']['port'] = 3306;
$config['SlaveServer']['username'] = 'thaideep';
$config['SlaveServer']['password'] = '***********;
$config['SlaveServer']['usepconnect'] = 0;



// ****** PATH TO ADMIN & MODERATOR CONTROL PANELS ******
// This setting allows you to change the name of the folders that the admin and
// moderator control panels reside in. You may wish to do this for security purposes.
// Please note that if you change the name of the directory here, you will still need
// to manually change the name of the directory on the server.
$config['Misc']['admincpdir'] = 'admincp';
$config['Misc']['modcpdir'] = 'modcp';

// Prefix that all vBulletin cookies will have
// Keep this short and only use numbers and letters, i.e. 1-9 and a-Z
$config['Misc']['cookieprefix'] = 'bb';

// ******** FULL PATH TO FORUMS DIRECTORY ******
// On a few systems it may be necessary to input the full path to your forums directory
// for vBulletin to function normally. You can ignore this setting unless vBulletin
// tells you to fill this in. Do not include a trailing slash!
// Example Unix:
//  $config['Misc']['forumpath'] = '/home/users/public_html/forums';
// Example Win32:
//  $config['Misc']['forumpath'] = 'c:\program files\apache group\apache\htdocs\vb3';
$config['Misc']['forumpath'] = '';



// ****** USERS WITH ADMIN LOG VIEWING PERMISSIONS ******
// The users specified here will be allowed to view the admin log in the control panel.
// Users must be specified by *ID number* here. To obtain a user's ID number,
// view their profile via the control panel. If this is a new installation, leave
// the first user created will have a user ID of 1. Seperate each userid with a comma.
$config['SpecialUsers']['canviewadminlog'] = '1';

// ****** USERS WITH ADMIN LOG PRUNING PERMISSIONS ******
// The users specified here will be allowed to remove ("prune") entries from the admin
// log. See the above entry for more information on the format.
$config['SpecialUsers']['canpruneadminlog'] = '1';

// ****** USERS WITH QUERY RUNNING PERMISSIONS ******
// The users specified here will be allowed to run queries from the control panel.
// See the above entries for more information on the format.
// Please note that the ability to run queries is quite powerful. You may wish
// to remove all user IDs from this list for security reasons.
$config['SpecialUsers']['canrunqueries'] = '';

// ****** UNDELETABLE / UNALTERABLE USERS ******
// The users specified here will not be deletable or alterable from the control panel by any users.
// To specify more than one user, separate userids with commas.
$config['SpecialUsers']['undeletableusers'] = '';

// ****** SUPER ADMINISTRATORS ******
// The users specified below will have permission to access the administrator permissions
// page, which controls the permissions of other administrators
$config['SpecialUsers']['superadministrators'] = '1';

// ****** DATASTORE CACHE CONFIGURATION *****
// Here you can configure different methods for caching datastore items.
// vB_Datastore_Filecache  - for using a cache file
// $config['Datastore']['class'] = 'vB_Datastore_Filecache';  
// vB_Datastore_Memcached - for using a Memcache server
// It is also necessary to specify the hostname or IP address and the port the server is listening on
// $config['Datastore']['class'] = 'vB_Datastore_Memcached';
// $config['Misc']['memcacheserver'] = '127.0.0.1';
// $config['Misc']['memcacheport'] = '11211';

// ****** The following options are only needed in special cases ******

// ****** MySQLI OPTIONS *****
// When using MySQL 4.1+, MySQLi should be used to connect to the database.
// If you need to set the default connection charset because your database
// is using a charset other than latin1, you can set the charset here.
// If you don't set the charset to be the same as your database, you
// may receive collation errors.  Ignore this setting unless you are sure
// you need to use it.
// $config['Mysqli']['charset'] = 'utf8';

// Optionally, PHP can be instructed to set connection parameters by reading from the
// file named in 'ini_file'. Please use a full path to the file.
// Example:
// $config['Mysqli']['ini_file'] = 'c:\program files\MySQL\MySQL Server 4.1\my.ini';
$config['Mysqli']['ini_file'] = '';
/*======================================================================*\
|| ####################################################################
|| # Downloaded: Doesen't matter. Enjoy this release!
|| # CVS: $RCSfile: config.php.new,v $ - $Revision: 1.31.2.3 $
|| ####################################################################
\*======================================================================*/

แก้งี้แล้วยังไม่ได้เลยช่วยอธิบาย แล้วยกตัวอย่างหน่อยคับ

ออฟไลน์ КёngЯacing

  • Administrator
  • *****
  • กระทู้: 284
    • ดูรายละเอียด
Re: สอนผมแก้ Config ทีคับ
« ตอบ #1 เมื่อ: 10/02/06, 13:06:17 »
SLAVE DATABASE ถ้าไม่มี ไม่ต้องใส่ เพราะมันจะใช้ไม่ได้
SLAVE DATABASE มันเป็นฐานข้อมูลสำรองสำหรับคนละเครื่องกันที่ใช้อยู่

โค้ด: [เลือก]
// ****** SLAVE DATABASE CONFIGURATION ******
// If you have multiple database backends, this is the information for your slave
// server. If you are not 100% sure you need to fill in this information,
// do not change any of the values here.
$config['SlaveServer']['servername'] = '';
$config['SlaveServer']['port'] = 3306;
$config['SlaveServer']['username'] = '';
$config['SlaveServer']['password'] = '';
$config['SlaveServer']['usepconnect'] = 0;

FULL PATH TO FORUMS DIRECTORY ใส่ด้วยสิ
โค้ด: [เลือก]
$config['Misc']['forumpath'] = '/path_to_forum-vB';
SUPER ADMINISTRATORS เอาใว้ใช้ในกรณีถ้าต้องการให้สมาชิกอื่นเข้าถึงส่วนผู้ดูแลระบบเต็มรูปแบบ โดยการใส่เลข id ของสมาชิกนั้น
ถ้าจะเป็นผู้ดูแลระบบคนเดียวก็ไม่ต้องใส่
ตัวอย่าง
โค้ด: [เลือก]
$config['SpecialUsers']['superadministrators'] = '1,3,8,9';
« แก้ไขครั้งสุดท้าย: 10/02/06, 13:17:28 โดย КёngЯacing »

ออฟไลน์ КёngЯacing

  • Administrator
  • *****
  • กระทู้: 284
    • ดูรายละเอียด
Re: สอนผมแก้ Config ทีคับ
« ตอบ #2 เมื่อ: 10/02/06, 13:10:21 »
เมื่อกี้เข้าไปสำรวจมา โค้ด error ที่ขึ้นมามีดังนี้

โค้ด: [เลือก]
<!--
Database error in vBulletin :

Invalid SQL:

SELECT title, data
FROM datastore
WHERE title IN ('','options','bitfields','forumcache','usergroupcache','stylecache','languagecache','products','pluginlist','cron','userstats','birthdaycache','maxloggedin','iconcache','eventcache','mailqueue');

MySQL Error  : Table 'thaideep_board.datastore' doesn't exist
Error Number : 1146
Date         : Friday, February 10th 2006 @ 12:56:15 PM
Script       : http://community.thaideep.com/
Referrer     :
IP Address   : 61.90.9.185
Username     :
Classname    : vb_database
-->

หัวข้อที่เกี่ยวข้อง
http://www.vbulletin.com/forum/showthread.php?t=174395

ลองตรวจสอบดูอีกทีว่า ฐานข้อมูลติดตั้งสมบูรณ์ปกติหรือเปล่า
« แก้ไขครั้งสุดท้าย: 10/02/06, 13:31:02 โดย КёngЯacing »

ออฟไลน์ 100z

  • New Member
  • *
  • กระทู้: 6
    • ดูรายละเอียด
Re: สอนผมแก้ Config ทีคับ
« ตอบ #3 เมื่อ: 11/02/06, 06:24:21 »
ยังไม่ได้เหมือนเดิมครับ   :(

Step 1) Verify Configuration

Config file exists and is readable.

Keygen checked and replaced files.

You can delete the sm-keygen.php (located in the forum root) now.

Warning: fopen(./admincp/control_examples/button_down.gif): failed to open stream: Permission denied in /home/hosting/freei/public_html/forum/sm-keygen.php(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(2) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code(1) : eval()'d code on line 48





และก็อีกยาวๆๆๆๆ เลย มันเป็นอะไรหรอคับ

ออฟไลน์ thaiscooter

  • New Member
  • *
  • กระทู้: 18
    • ดูรายละเอียด
    • MotorCycle Classic Club Thailand
Re: สอนผมแก้ Config ทีคับ
« ตอบ #4 เมื่อ: 11/02/06, 18:48:10 »
แก้ไข Permission ให้ full แล้วหรือยัง

ออฟไลน์ ruxky

  • New Member
  • *
  • กระทู้: 4
    • ดูรายละเอียด
Re: สอนผมแก้ Config ทีคับ
« ตอบ #5 เมื่อ: 12/02/06, 11:07:05 »
ผมก็เคยเป็นตอนใช้ 3.5.2 พอเปลี่ยนมา 3.5.3 ก็หายอะครับ